460 Motor Mounts-Solid or Rubber?

Solid or Rubber?

A common question in regards to selecting the right 460 motor mounts for the 460 swap is whether to use solid steel or rubber mounts.

Although people are often told to buy solid steel mounts, solid steel engine mounts are NOT recommended for use in daily-driver trucks. The reason for this is that solid steel engine mounts do not allow for any give or movement, resulting in cracked engine frames. While solid steel mounts can be appropriate for drag racing, they are NOT appropriate for daily driver vehicles.

Unless you are drag racing, rubber mounts are the appropriate choice for you daily driver truck.

Burnin’ Desire 1995 Special

Our customer as seen on the cover of Off-Road magazine

By Rick Sieman

Todd and Lisa Rabert have been truck fanatics for a long time. It all started in 1987 with Todd’s first truck, a Ford F-150. He knew absolutely nothing about making a tall vehicle, but wanted to get that thing up in the air. He started with a 3-inch body lift that let him run 31-inch Buckshot tires.

This didn’t last long-a 4-inch suspension lift allowed him to run 34-inch Swampers. This truck was beat to death romping in the hills with friends. It was replaced with a ’91 Ford F-250 that Todd swore he was going to leave alone.

His promise turned to vapors when he went to a truck show in Bloomsburg. Once again, he started lifting, adding big tires, more lift, and so on. It ended up with a 6-suspension lift, 3-inch body lift, and 42-inch Super Swampers for traction.

When Todd got married, he and Lisa decided this truck was not show material, so they decided to let it all hang out and build exactly what they wanted. This meant starting out with the right stuff: On March 21, 1994, they went out and purchased a brand-new Ford F-350 with a 460 under the hood.

Less than a week later, the new truck was in a zillion pieces in their backyard. Since Todd had experience with a few trucks, he knew what he wanted and what mistakes to avoid. Right off, he knew that no lift blocks would be part of this project. It would be done right!

Customer of the Month

Please check out our latest sponsor and Customer of the Month Nate!

Nate’s Instagram

Customer Gallery

Nate has won several awards featuring our:

Fenderwell Exit Headers

460 Motor Mounts

460 Clutch Flywheel Assembly

60″ Ladder Bars

Nate’s Awards-Silver Truck

Be in our Gallery!

Contact us to be featured in our customer gallery!

Doin’ The Monster Swap

Doin’ The Monster Swap

By Tom Madigan

Complete 460 swap by L&L Products

460 Swap Kits

Headers

Oil Pan Kit

Accessory Drive and Mounting Kits

460 Clutch Kits

460 Fenderwell Exit Headers

460 Clutch Kit

460 7 Quart Oil Pan

460 Remote Oil Filter Relocation Kit

Got Billet?

L&L Products Billet remote oil filter canister as seen in Sport Truck magazine

By David Brown

“Billet is a finely machined piece of solid, non-cast aluminum. Items made from this metal maintain a high luster but also seem to give a rich, quality appearance, as opposed to a gaudy one. So next time you think of spending your money on  a slap-0n piece for your truck, consider the billet option and contact the companies below.”

Click HERE to order the product featured in this article!

533 Cubic-Inch Big Block Ford – Bodacious Big-Block Part 1

By Alan Huber
Photography: Alan Huber

This Article was reproduced from Peterson’s 4-Wheel & Off Road site. The original article can be found here @ 4wheelOffRoad.com.

Some things in this world are just better if they’re bigger. Burgers and fries get super-sized. Lotteries hold no interest unless their jackpots are well into eight figures. Hot rodders know there’s no replacement for displacement, and the most popular supermodes have … well, every theory has to have some limits.

L & L conversion Kit Massiveness can sometimes be unwieldy and difficult to live with. Aircraft carriers take 20 miles to burn a “U.” Too many super-size meals will cause you to do the same. And Anna Nicole Smith has…well, had way too much mention already. However, building a big-displacement engine by starting with a Ford 460 is easy.

Stroker engines are all the rage these days. Big torque numbers, seemingly without a horsepower penalty, draw in enthusiasts like a free summer Springsteen concert in Jersey. Many times, though, stroker motors take special pains to assemble. Out-of-the-ordinary machining, clearancing, and fitting of custom parts is off-putting to most. We wanted a stroker that didn’t require 10 trips to the machine shop and could be assembled by us engine neophytes at home where we’d be close to the brews.

What follows is our plan in two parts. This month we’ll start with a stroked short-block with standard machining and assembly done by a reputable shop (Speed-O-Motive) and bolt on a great suite of aluminum speed parts (Edelbrock Performer RPM) to make the long-block. In part two, we’ll swap it all into our fullsize Bronco using quality, easy-to-find-and-get conversion pieces (L&L Products), and fire it up. By the way, L&L Products happens to be in Texas where folks’ll never let you forget that bigger is better. Please check out @ 4wheelOffRoad.com for the rest of this article.